Carpet feels like fabric, but most of the carpets on the market today are made from synthetic polymers. In fact, more than half consists of nylon, which is made from plastic. Some of the milk jugs and soft drink containers you recycle wind up being reborn as carpeting. Other plastic materials used are acrylics, polyester and polypropylene, which is also called olefin. Only a small percentage – less than 3% – of very expensive carpeting is made of woven wool. Woven wools have the advantage of aging gracefully and cleaning well, but they can’t stand up to traffic and moisture like a synthetic.
To make the carpeting, the textile materials are formed into pile yarns that are dyed and sewn to a primary backing and then glued to a secondary backing that adds strength and stability to the carpet and separate layer of padding. Woven or non-woven polypropylene is most often used to make both layers of backing, although a small percentage of carpet backing is made with jute, a natural fiber woven into coarse fabric. Synthetic rubber latex is the glue that binds the layers together.
Most carpet padding is made of rebond, a recycled scrap urethane that is chopped and pressed into layers. A thin layer of plastic is bonded to the top to hold the pieces together and give the padding a smooth, uniform surface.
How Carpet is Made
The process of carpet manufacturing has several steps. First, the yarns are tufted, which is the process of weaving the fibers into the primary backing. A tufting machine has 12-foot long rollers and up to 12,000 needles that pull the yarn through the weave of the backing much in the same way a sewing machine would. A small hook grabs each stitch of yarn to create a loop. In carpet lingo, this is called loop pile construction, for obvious reasons. Photoelectric sensors programmed to produce a specific pile height control the size of the loop. Higher pile makes shaggier carpet. In the ‘70s, shag pile was all the rage, but most of the carpet on the market today is low profile pile with uncut loops, which stands up to traffic much better because no cut ends are exposed. It’s easier to clean and less likely to fray or separate from the backing.
Depending on the carpet style under construction, the loops may be cut in the next step. Cutting the loops makes for a fluffier carpet that your toes sink into. Cut and loop construction is used to make variations in the cutting process, forming dimensional patterns by cutting some loops and leaving others uncut.
The yarn might be dyed before or after tufting. Dyeing the yard after tufting allows more consistency, greater control and more options. There are several basic methods of dying the tufted carpet:
- Boiling – The most effective method used to dye solid color carpeting is boiling. The tufted carpet is sewn into a continuous roll and placed in a vat filled with water. Dye and chemicals are mixed in and the water is heated to a boil. The carpet is boiled for four hours in the dye mixture.
- Silkscreening – To print designs or patterns on carpet, white tufted carpet is silkscreened in a process similar to the way designs are printed on tee shirts, only on a much bigger scale. The carpet is put under a screen with holes cut out, like a stencil and a color is pushed through the holes using something like a big squeegee. Then the carpet is pulled forward one yard and the next screen is lowered in place for the next part of the design. At the same time, the first design is applied to the next yard of carpet. This process continues until all the colors are applied and the design is complete. Up to eight different colors can be applied using this method.
- Another method of design printing involves rolling carpet under embossed rollers. A similar concept is used to texture wall paints for a faux finish style.
After the carpet is dyed or the design is screened or transferred, the carpet is steamed to set the colors, rinsed of excess dye and dried.
The Final Process
After the carpet is tufted and dyed, it is bonded to a backing material. The ends of the carpet are sewn together to make a bolt length, like the rolls you see in flooring stores. The carpet is loaded into a machine that coats the underside of the carpet and the secondary backing material with latex adhesive. After both pieces are coated, they are pulled into a marriage roller. The pressure of the tightly wound material on the adhesive layers permanently bonds the backing to the carpet. To finish the job and ensure the bond, the carpet is heated in an oven.
Before shipping, the carpet is steamed, brushed, vacuumed, and then run though a machine that shaves any uneven tufts, leaving the surface smooth and uniform. The finished carpet is finally ready for delivery to the manufacturer’s warehouse or a retail outlet. And that’s how carpet is made.
This Learning Center belongs to you. We invite you to contribute to it.
Have you got a question about what you've read here? Tell us about in the comments section.
If you're an expert in the field, and see something that is inaccurate, tell us, and we'll make the correction.
Also, if you think there is important information that is absent from any of these articles, please let us know!