Brazilian Cherry (aka Jatoba)

Botanical Name: Hymenaea courbaril

Brazilian cherry is a species of cherry tree from South America. It is one of the hardest woods available for hardwood floors. When aged, the wood is deep and rich in color, which is one of its most desirable qualities. This wood species is the most popular imported species of wood on the market today.

Fast Facts

3401023681 5214440e89 Brazilian Cherry (aka Jatoba)

Color: When the wood is first harvested, it will be tan, yellow, or a pink salmon color depending on whether it is heartwood or sapwood. With age and exposure to sunlight, it will darken to a deep reddish brown color.

Grain: The grain is generally consistent with an interlocked appearance. It is rough which makes it difficult to mill and install.

Variations within Species and Grades: There is a high variation of color within species and grades.

Hardness/Janka: With a hardness of 2,820, this wood species is more than 100% harder than the traditional red oak.

Dimensional Stability: Brazilian cherry is rated at 8.5, which makes it average, and 1% more stable than traditional red oak. It is important to note however, the actual installations have shown considerable movement. To combat this, leave the wood in the room it will be installed in for a longer period of time before installing it.

Sawing/Machining: Since the wood is so hard, it is difficult to saw and mill. When it is done, it requires frequent sharpening of tools used to complete the job. It is recommended to use carbide tools. It can be machined smooth.

Sanding: Sanding this kind of wood is difficult because of how easily the scratches can be seen. It is important to follow recommendations exactly to prevent scratches because they will be visible beneath the finish.

Nailing: Making sure to get the correct angle is considerably important when nailing Brazilian Cherry because of the hardness of the wood. If a pneumatic nailer is used to install the floor, the air pressure should be adjusted accordingly.

Finishing: Try to avoid an oil modified polyurethane finish, because this may cause white spots to show up on the floor and there is no known way to remove them, other than by using a different board. Using a clear sealer or neutral colored stain and then buffing a satin polyurethane finish onto the floor will avoid this problem.

Availability: Brazilian cherry is easily available.

A Brief History of Brazilian Cherry

The Brazilian cherry tree is frequently seen throughout various areas in South America. It is a tree frequently seen in the rainforest, and as such is becoming increasingly endangered.

Durability

With a Janka Scale rating of 2,820, this floor is very hard, strong, and durable. However, scratches will show easily on the floor because of its dark color, so it is important to treat the floor with care. The floor will darken faster when exposed to sunlight. With little to no sunlight exposure, it will darken over a period of several months. Using a water based finish will make it darken at a slower rate, but an oil based finish will enhance the overall look of the flooring.

Workability

The hardness of the wood makes it difficult to work with. Tools must be frequently sharpened to handle the cutting and shaping of the wood for flooring or any other purpose. Nailing is difficult because the angle must be adjusted to account for the hardness of the wood. Sanding is difficult because of how easily scratches can be seen on the surface.

Where to Use

Since Brazilian cherry is so hard, it can be used in both residential and commercial applications. It can be used in any room where the floor’s darkening color will complement the décor. While it is believed that Brazilian cherry flooring won’t move too much, it is recommended to keep water away from it whenever possible.

Care and Maintenance

The care and maintenance of the floor is determined more by the finish rather than the wood species itself. As with any wood floor, rugs and mats should be used in high traffic areas to protect the finish and prevent scratches. Clean the floor on a regular basis with a cloth mop to keep dirt from scratching the floor. As this wood is harder than many others used for flooring, it can likely withstand more wear and tear with less damage, though it is important to remember that how the floor is cared for will be a bigger factor in how it looks as it ages than the Janka Scale rating.

Environmental Issues

The Brazilian cherry tree is considered endangered by some. This means using it for flooring may pose some environmental issues for our rainforests. If you choose to use this wood, discuss the manufacturing methods with the vendor.

Related posts:

  1. Cherry, American (aka Black)
  2. Walnut, Brazilian (aka Ipe)
  3. Teak, Brazilian (aka Cumaru)

This Learning Center belongs to you. We invite you to contribute to it.

Have you got a question about what you've read here? Tell us about in the comments section. 

If you're an expert in the field, and see something that is inaccurate, tell us, and we'll make the correction. 

Also, if you think there is important information that is absent from any of these articles, please let us know!

{ 1 trackback }

Brazilian Cherry Flooring | Brazilian Cherry Flooring
March 1, 2012 at 2:39 pm

{ 8 comments… read them below or add one }

dave k July 8, 2010 at 7:49 pm

I Acutually have a question, I am using brazillian cherry, I,m using my finishing nailer,at around 90-95 psi. and the wood is splitting apart,does and one have a suggestion on how to work with this wood, without it breaking apart like this…….

Heather M March 16, 2012 at 4:55 pm

We have jotaba floor treads and the finish had worn some during the last 6 years. We lightly sanded and recoated them with the same finish we had used the first time, but white spots appeared and ruined the look of the finish. We sanded them lightly again, and a little harder on the spots and then reapplied it. Even more spots appeared over time. Do you have a suggestion for us to try?

Kate October 31, 2012 at 12:20 pm

Why do some manufacturers say that you can install engineered Jatoba over a radiant floor (electric heated) and some don’t recommend it?
Thank you.

Michael Kammel November 10, 2012 at 7:36 pm

I have a 9 riser Jatoba stair case and railing that I would like to finish in clear stain. Can you reccommend a sealer and type of clear stain. Also if there is a specific procedure to follow.

Thanks

Mike

Caroleanne Phillips December 6, 2013 at 8:18 pm

Can a power steam mop be used on Brazilian Cherry floors?

Rob Jones December 18, 2013 at 8:02 pm

I wouldn’t recommend it. High levels of heat and moisture tend to be very bad for wood floors of all kinds.

Hope this helps!

craig February 17, 2014 at 1:35 am

I have the jabota cherry flooring and my daughter had a house party and the guest used chairs which scratched the floor. the scratches are not to deep. what can i do to remedy this

Mark Cameron August 22, 2014 at 2:06 pm

We are having jabota cherry flooring installed and are having 3 coats of clear sealer put on but we are not sure if we should use a satin or semi-gloss… would one or the other be better and show less scratches? I am handicapped and would be on it with my electric scooter.

Leave a Comment

Notify me of followup comments via e-mail. You can also subscribe without commenting.